TM 9-4310-394-13
e.
Installation.
NOTE
Wrap all male pipe threads with anti-seize tape before assembly of pipe threaded items.
(1)
Install drain cock onto air receiver tank (2).
(2)
Install nipple (17), unloader valve (16), elbow (15), nipple (14), tee (13), and elbow (12) onto air receiver
tank (2).
(3)
Install air receiver tank (2), two rubber bumpers (11), two lock washers (10), two flat washers (9), and two
nuts (8) onto unit.
(4)
Install unloader valve muffler (7), safety valve (6), and relief valve (5).
(5)
Install discharge tube (4).
(6)
Install air gauge (3).
(7)
Check that drain cock is fully closed.
4-43
