TM 9-4310-394-13
4-24. TOOL BOX REPLACEMENT.
This task covers:
a.
Removal
b.
Cleaning
c.
Inspection
d.
Installation
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's (Appendix B, Item 1)
Material's/Parts Required
Cloth, Lint-Free (Appendix E, Item 1)
Brush, Medium Bristle (Appendix E, Item 2)
Equipment Condition
Air compressor unit shut down and cool.
a.
Removal. (Refer to Figure 4-14).
(1) Remove screw (1), lock washer (2), and flat washer (3).
(2) Remove two screws (4), two lock washers (5), and two flat washers (6).
(3) Remove tool box (7) from unit.
b. Cleaning.
(1) Remove all build up of dirt, oil, and debris from all surfaces.
(2) Clean all metallic parts with a clean soft cloth or a medium bristle brush.
c. Inspection.
(1) Inspect all threads for damage.
(2) Check tool box for cracks dents.
d. Installation.
(1) Install tool box (7), two flat washers (6), two lock washers (5), and two screws (4).
(2) Install flat washer (3), lock washer (2), and screw (1).
4-50
