TM 9-4310-394-13
4-26. AIR CLEANER, FILTER ELEMENT, AIR INLET HEATER REPAIR, AND AIR INTAKE PIPE
REPAIR AND REPLACEMENT. - Continued.
c.
Installation.
WARNING
Never run the engine without the air cleaner
element. Rapid engine wear may result.
(1) Install gasket (25), air intake pipe (24), screw (23), gasket (22), spacer (21), and three nuts (20).
(2) Install terminal lug (15), lock washer (14), and nut (13) onto air inlet heater (12).
(3) Install terminal lug (11), washer (10), washer (9), and nut (8) onto air inlet heater (12).
CAUTION
Air inlet heater can be damaged if improperly
installed. Be sure long stud on air inlet heater
points away from muffler.
(4) Install spacer (19), air inlet heater (12), gasket (18), inlet air heater spacer (17), and four bolts (16).
(5) Install new gasket (7), air cleaner housing (6), and three bolts (5).
(6) Install air cleaner element (4) into air cleaner housing (6).
(7) Replace air cleaner housing cover (3).
(8) Replace and tighten washer (2) and wing nut (1).
4-56 / (4-57 Blank)
