TM 9-4310-394-23P
(3) Items that are included in kits and sets are listed below the name of the kit or set.
(4) Spare/repair parts that make up an assembled item are listed immediately following the assembled item line
entry.
(5) Part numbers of bulk materials are referenced in this column in the line entry for the item to be
manufactured/fabricated.
(6) When the item is not used with all serial numbers of the same model, the effective serial numbers are shown
on the last line(s) of the description (before UOC).
(7) The usable on code, when applicable (reference paragraph 5, Special Information).
(8) In the Special Tools List Section, the basis of issue (BOI) appears as the last line(s) in the entry for each
special tool, special TMDE, and other special support equipment. When density of equipment supported
exceeds density spread indicated in the basis of issue, the total authorization is increased proportionately.
(9) The statement “END OF FIGURE" appears just below the last item description in Column (5) for a given figure
in both Section II and Section III.
f. QTY (Column (6)). The QTY (quantity per figure) column indicates the quantity of the item used in the
breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly.
A "V" appearing in the column in lieu of a quantity indicates that the quantity is variable and may vary from application to
application.
4. EXPLANATION OF COLUMNS (SECTION IV).
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1) STOCK NUMBER Column. This column lists the NSN in national item identification number (NIIN)
sequence. The NIIN consists of the last nine digits of the NSN, i.e. When using this column to locate an item, ignore the
first four digits of the NSN. However, the complete NSN should be used when ordering items by stock number.
(2) FIG. Column. This column lists the number of the figure where the item is identified/located. The figures
are in numerical order in Section II and Section III.
(3) ITEM Column. The item number identifies the item associated with the figure listed in the adjacent FIG.
column. This item is also identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed in ascending alphanumeric sequence (i. e.,
vertical arrangement of letter and number combinations which place the first letter or digit of each group in order A
through Z, followed by the numbers 0 through 9, and each following letter or digit in like order).
(1) FSCM column. The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric code used to
identify the manufacturer, distributor, or Government agency/activity that supplies the item.
6
