TM9-4310-396-13
MAINTENANCE OF PARKING BRAKE ASSEMBLY
4-38.
REPLACE PARKING BRAKE ASSEMBLY.
This task covers: a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Conditions:
General Mechanics Tool Kit
Engine stopped, para. 2-6.8
Trailer stabilized
Pneumatic tire and wheel removed, para. 4-34
Materials/Parts
Cable (P/N FB-1)
Cable (BB-2)
a.
Removal.
(1) Remove cotter pin (1, Figure 4-31) and pin (2) from cable bracket.
(2) Remove parking brake cable (3) from cable holder (4) on vehicular wheel hub.
(3) Remove plain hexagon nut (5) and flat washer (6).
(4) Remove cap screw (7), cable bracket (8), and brake cable (3).
(5) Remove cotter pin (9) and pin (10) from brake cable (3).
(6) Remove plain hexagon nuts (11) from brake cables (3) and remove bracket (30).
(7) Remove cap screw (12) from cable clamp (13).
(8) Remove cotter pin (14), flat washer (15) and pin (16) from handle lever (17).
(9) Remove plain hexagon nuts (18), lock washers (19), and flat washers (20) from plate (21).
(10) Remove cap screw (22) and cable bracket (23).
(11) Remove plain hexagon nuts (24).
(12) Remove cable (25).
(13) Remove plain hexagon nuts (26), lock washers (27), flat washers (28), and cap screws (29).
(14) Remove handle lever (17).
4-78
