TM9-4310-396-13 APPENDIX F TORQUE LIMITS F-1.  ENGINE TORQUE LIMITS Tightening Where Specified Torque Be Thread No. Torque Applied Dia.  X Pitch ft-lb (kg-cm) Remarks Valve Rocker Arm Support M8 X 1.25 14.5-16.6 12 mm (200-230) Flywheel End Nuts* M16 X 1.5 86.8-94.0 14 mm (1200-1300) Crankcase Cover Bolts 13-M8 X 1.25 14.5-16.7 12 mm 200-230 Stiffener Bolts On Crankcase Cover M8 X 1.25 14.5-16.6 12 mm (200-230) Head Stud Bolts' 4-M9 X 1.25 9.4-10.8 Apply "screw locking (130-150) agent" Cylinder Head Nuts* 4-M9 X 1.25 30.4-33.3 14 mm (420-460) Nozzle Case Nut 1-0.605-40UNS-2B 28.9-32.5 15 mm (400-450) Fuel Injection Plate Holder M14 X 1.5 21.7-25.3 17 mm (300-350) Fuel Injection Pump Stud Bolts' 3-M6 X 1.0 5.1-7.2 Apply "screw locking (70-100) agent" Fuel Injection Pump Nuts 3-M6 X 1.0 7.2-8.7 10 mm (100-120) Fuel Injection Nozzle Bolts' 2-M6 X 1.0 5.1-7.2 Apply "screw locking (70-100) agent" Fuel Injection Nozzle Nuts 2-M6 X 1.0 7.2-8.7 10 mm (100-120) NOTES: 1. For nuts marked *, apply engine oil to the thread and seat. F-1