TM 5-4310-451-14
5-60. METERING FUEL PUMP REPLACEMENT (Con’t).
b.
INSTALLATION
1.
Install fork (7) in fuel pump (2).
2.
Apply grease to new gasket (8) and install on governor housing (10).
3.
Aline fork (7) with blower shaft (9) in governor housing (10) and install fuel pump (2) to governor housing.
4.
Apply sealing compound to threads of three screws (6) and install in fuel pump (2) and governor housing (10).
5.
Apply sealing compound to threads of elbows (3 and 4).
6.
Install elbows (3 and 4) In fuel pump (2).
7.
Connect fuel hose (5) to elbow (4) and fuel hose (1) to elbow (3).
FOLLOW-ON TASKS:
Install thermostat crossover tube (see paragraph 4-49).
Start engine (see paragraph 2-10) and check for fuel and coolant leaks.
5-201
