TM 5-4310-393-144-15.FUEL FILTER.This task covers A. ReplaceTools:Materials/Parts:Tool Kit, General Mechanic's SetTape, Masking NSN 7510-00-283-0612Filter, Fuel P/N 00329102Equipment Conditions:Unit Must Be Cool:Fuel Tank EmptyWell Ventilated AreaA.Replace.1.Removing the Fuel Filter.a.Disconnect gravity feed line (Figure4-12, Item 1) at the pump end and drain fuel tank into asuitable container. Reconnect fuel line (1) to pumpb. Remove banjo bolt (2) and ringpiece (3) and washers (4) Apply closures to open end offuel line.c.Remove four cap screws (5) fromfilter mounting plate (6). Remove and discard fuel filterassembly (7).2.Installing the Filter.a.Remove closures from fuel lines andreplace fuel filter with new part in reverse order ofremovalFigure 4-12. Fuel Filter4-16.PURIFICATION CYLINDER.This task covers: A. ReplaceTools:Materials/Parts:Tool Kit, General Mechanic's SetNon-ionic Detergent, NSN 7930-00-282-96997/16" Deep Well SocketDistilled Water, NSN 6810-00-297-9540Equipment Conditions:Compressor SecuredPressure Purge From SystemA.Replace1.Replacing the Purification Cylinder.NOTEReplace the purification cylinder with an identical unit only.a. Purge all pressure (paragraph 2-3) from the system by opening purge valve.b.Disconnect inlet and outlet air lines from the bottom of the cylinder.4-29
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business