TM 5-4220-227-14
4-41. Fluorescent Light Assembly (Cont).
b.
Repair. (figure 4-28)
(1)
Loosen three screws (1) and remove cover (2).
(2)
Remove three plastic washers (3), spacer (4), and gaskets (5) from screws (1).
(3)
Remove tube (6) from light assembly (7) and remove clip (8) from tube.
(4)
Inspect all components and replace all components that are damaged.
(5)
Install clip (8) on tube (6) and install tube into light assembly (7).
(6)
Install three gaskets (5) on screws (1) and install screws in cover (2), and install spacers (4) and plastic
washers (3).
(7)
Install cover (2) on light assembly (7) and tighten screws (1).
4-66
