TM 5-4220-227-14
4-44. Battery Card and Case
This task covers:
Repair
INITIAL SETUP:
Materials/Parts
Fuses
Repair. (figure 4-31)
NOTE
There are two fuses. Replacement of each fuse is the same.
(1)
Unlatch two latches (1), open hood assembly door (2), and install two supports (3) and pins (4).
(2)
Disconnect communicator assembly electrical plug (5) from the power strip (6).
NOTE
Fuses are accessible from open top of panel.
(3)
Remove fuse cap (7) and fuse (8) from fuse holder (9).
(4)
Inspect fuse to determine if it is blown.
(5)
Install good fuse (8) and cap (7) on fuse holder (9).
(6)
Connect communicator assembly electrical plug (5) to power strip (6).
(7)
Remove two pins (4), supports (3), close hood assembly door (2), and secure with two latches (1).
4-72
