TM 5-4220-227-14
5-23. Wiring Harness (Cont).
(23) Install cables (14) and (15) and connect them to scrubber assembly (16) and heater chiller unit (17).
(24) Install cover (10) on junction box (11) and secure with four screws (9).
(25) Connect wires (3) to terminal board (7).
(26) Route wires (3) through shell penetrator (8) and connect wires to connector (1).
(27) Install connector (1) on speaker (2).
(28) Install cover (5) on junction box (6) and secure with four screws (4).
c. Repair.
(1) Inspect wiring harness.
(2) Refer to TM 5-4220-227-24P for materials to manufacture wiring harness.
(3) Replace any terminal lugs or connectors that are missing or damaged.
(4) Replace any wire that has burnt, cracked, or otherwise damaged insulation.
5-66
