TM 5-4220-227-14
5-24. Front Panel Chassis Assembly.
This task covers:
a.
Replace
b.
Repair
INITIAL SETUP:
Tools
Equipment Condition
General Mechanic's Tool Kit
Communicator assembly removed (para. 4-43).
(NSN 5180-00-177-7033)
Soldering Gun
Materials/Parts
Front Panel Chassis Assembly
a.
Replace. (figure 5-31)
(1) Remove four screws (1) and washers (2) and remove top and bottom plates (3) and (4).
(2) Remove four screws (5) and washers (6) and remove front panel chassis assembly (7) and two handles (8) from
case (9).
NOTE
If repair by replacement of a panel mounted component is needed, remove only the wire
leads to the component to be replaced. Access to panel rear for component replacement
may, in most cases, be obtained by removal of top or bottom panel.
(3) Tag and disconnect wires from chassis assembly components.
(4) Reconnect all wires to chassis assembly components and remove tags.
(5) Install front panel chassis assembly (7) and two handles (8) on case (9) and secure four screws (5) and washers (6).
(6) Install top and bottom plates (3) and (4) and secure with four screws (1) and washers (2).
5-70