TM 5-4220-227-14
5-27. Battery Card and Case (Cont).
(3) Replace fuse holder. (figure 5-44)
NOTE
There are two fuse holders. Replacement of each fuse holder is the same.
(a) Remove battery card and case (para. a. above).
(b) Tag and disconnect wires to fuse holder (1).
(c) Remove fuse cap (2) and fuse (3) from fuse holder (1).
(d) Remove nut (4) and remove fuse holder (1).
(e) Install fuse holder (1) in card box bracket (5) and secure with nut (4).
(f) Install fuse (3) and cap (2) on fuse holder (1).
(g) Connect wires to fuse holder (1).
(h) Install battery card and case (para. a. above).
Figure 5-44. Battery Card and Case Fuse Holder, Replace.
5-88
