TM 5-4220-227-14
6-12.
Condensing Unit Hermetic (Cont).
(4)
Replace compressor. (figure 6-23).
(a)
Remove condensing unit hermetic (para. a. above).
(b)
Desolder tube (1) from tube discharge connector (2).
(c)
Remove screw (3) and tube clip (4).
(d)
Remove four nuts (5), lockwashers (6), grommets (7), locknuts (8), and studs (9) and remove
compressor (10).
(e)
Install four studs (9), locknuts (8), and grommets (7).
(f)
Install compressor (10) and secure with lockwashers (6), and nuts (5).
(g)
Install tube clip (4) and screw (3).
(h)
Solder tube (1) on tube discharge connector (2).
(i)
Install condensing unit hermetic (para. a. above).
Figure 6-23. Condensing Unit Hermetic Compressor, Replace.
6-48
