Figure 2-3. Storing Swivel Jacks.

Figure 2-2. Coupling Trailer to Towing Vehicle

Figure 2-4. Uncoupling Trailer from Towing Vehicle

TM-5-4220-233-14 Trailer Mounted Type I Manifold Servicing Unit Trailer Mounted Type II Manifold Servicing Unit Oxygen Booster Pump Oxygen Charging Station Manual
Page Navigation
33

TM 5-4220-233-14 Figure 2-3. Storing Swivel Jacks. (11) Raise sandshoes on all three swivel jacks (1) and rotate up to store under Servicing Unit. (12) Adjust position of sandshoes on jacks, as necessary, to ensure jacks (1) are tight against chassis. (13) Release hand brake lever (2). (14) Perform the Before PMCS procedures Steps 6C and 8A that require the trailer to be coupled with the towing vehicle and its connections. c. Towing Instructions. WARNING Before moving Servicing Unit, ensure that all loose equipment is properly stowed and that nothing will drag on the ground. Failure to follow this warning may result In Injury to personnel or damage to equipment. NOTE When towing the Servicing Unit, overall length of the unit must be kept In mind when passing other vehicles and when turning. Turning and backing operations will be affected because the towing vehicle and Servicing Unit are a hinged unit. Always tow the Servicing Unit at safe speeds and note any driving Irregularities. When backing Servicing Unit maintain a low speed. The surge actuator will engage and the brakes will be applied, if the Servicing Unit is backed up too fast 2-18

Privacy Statement
Press Release
Contact