TM 5-4220-233-14
3-5.
WHEEL AND TIRE ASSEMBLY.
This task covers:
a.
Removal
b.
Removal of Spare Tire
c.
Stowage of Damaged Tire
d.
Installation
INITIAL SETUP :
Tools
Materials/Parts Appendix D
Wrench Lug 15/16"
Wiping Rag
10" Adjustable Wrench
Equipment Conditions
None
a.
Removal.
Figure 3-3. Wheel and Spare Tire Removal.
NOTE
This procedure requires two personnel
(1)
Apply handbrake (1).
(2)
Loosen, but do not remove eight nuts (2) from wheel (3)
(3)
Position one front and two rear swivel jacks by rotating jacks downward. Raise trailer using applicable
swivel jack until wheel is off ground.
3-9
