TM 5-4220-233-14
3-6. SERVICE SURGE ACTUATOR
This task covers:
a.
Filling the Master Cylinder
INITIAL SETUP :
Tools
Materials/Parts Appendix D
None
Wiping Rag
Equipment Conditions
None
NOTE
This procedure covers filling the master cylinder with brake fluid. The lubrication
of the surge actuator's grease points is described in paragraph 3-1
(1)
Clean the area around the cap on master cylinder at surge actuator. Inspect for leakage. Refer to
paragraph 2-3 for an explanation of the classes of leaks.
(2)
Remove the hand tightened cap (1) on master cylinder (2). Clean thoroughly.
(3)
Fill master cylinder reservoir (2) with brake fluid to within 1/2 in or 13 mm of the top.
(4)
Replace cap (1) and ensure that all excess has been wiped away.
3-11/(3-12 blank)
