TM 5-4220-233-14
4-21. CYLINDER ASSEMBLY
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP :
Tools
Materials/Parts Appendix D
Wrench, 1-1/16"
Plastic Bags (item 2)
Equipment Conditions
Depressunze Compressed Gas System
(paragraph 4-19)
NOTE
This procedure describes the steps necessary to remove one of the cylinders, but
is applicable to all eight cylinders on the Servicing Unit.
a.
Removal.
WARNING
Prior to performing this task, maintenance personnel should review Section
VII for general guidelines on removing and installing components on life
support systems. Failure to follow proper procedures may result In system
contamination.
Figure 4-3. Replace Cylinder Assembly.
4-21
