TM 5-4220-233-14
4-22. CYLINDER CLAMP ASSEMBLY.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP :
Tools
Materials/Parts Appendix D
None
None
Equipment Conditions
Remove Cylinder Assembly
(paragraph 4-21)
Figure 4-4. Replace Cylinder Clamp Assembly.
a.
Removal.
(1) Unscrew “T” bolts of clamp halves (1) from frame (2). Discard clamp if defective.
b.
Installation.
(1) Screw “T” bolts of clamp halves (1) into frame (2) until 1-2 threads are left exposed.
(2) Reinstall cylinder assembly as prescribed In paragraph 4-21.
4-23
