TM 5-4220-233-14
4-26. PRESSURE REGULATOR.
This task covers:
a.
Removal
b.
Cleaning
c. Installation
INITIAL SETUP :
Tools
Materials/Parts Appendix D
Pliers, Snap Ring
Ant-seizing Tape (item 16)
Rule, Machinists
Plastic Bags (item 2)
Screwdriver, Flat Tip
Screwdriver, Cross Tip
Equipment Conditions
Socket Wrench handle, 1/4" Drive With 6" Extension
Depressurize Compressed Gas System
Socket, 7/16"
(paragraph 4-19 )
Wrench, 9/16"
Wrench, 11/16"
Wrench, Hex 3/16"
a.
Removal.
WARNING
Prior to performing this task, maintenance personnel should review Section
VII for general guidelines on removing and Installing components on life
support systems. Failure to follow proper procedures may result in system
contamination.
Figure 4-8. Remove Pressure Regulator.
4-30
