TM 5-4310-226-15
This includes, but is not limited to, inspection, cleaning,
d. Tools and Equipment. Column 4. This column
preserving, adjusting, replacing, welding, riveting and
is provided for referencing by code the special tools and
strengthening.
test equipment, required to perform the maintenance
functions (Section II).
J-OVERHAUL.
e. Remarks. Column 5. This column is provided
for referencing by code the remarks Section III)
To restore an item to a completely serviceable
pertinent to the maintenance functions.
condition
as
prescribed
by
maintenance
serviceability standards using the Inspect and
Repair Only as Necessary (IROAN) technique.
B-3. Explanation of Columns in Section III
K-REBUILD.
a. Reference Code. This column consists of two
letters separated by a dash, both of which are
To restore an item to a standard as nearly as
references to Section II. The first letter references
possible to original or new condition in appearance,
column 5 and the second letter references a
performance, and life expectancy.
This is
maintenance function, column 3, A through K.
accomplished through complete disassembly of the
b. Remarks.
This column lists information
item, inspection of all pats or components, repair or
replacement of worn or unserviceable elements
pertinent to the maintenance function being performed,
(items) using original manufacturing tolerances and
as 4indicated on the MAC, Section II.
specifications, and subsequent reassembly of the
item.
B-2
