ITEM
PAR REF
CONTROLS AND INSTRUMENTS. Replace damaged instruments.
23.
Tighten lose mounting. With unit operating, check for proper
operation. Normal operating readings for instruments are as
follows:
Engine Water Temperature Gage------------ 165 to 185
Engine OiI Pressure Gage-------------------- 30 to 40 psi
Terminal Pressure Gage ---------------------- 100 psi
14
Ammeter ------------------------------------------- Charge
Tachometer --------------------------------------- 1800 rpm
Compressor Discharge Temperature Gage 170 to 210F
NOTE 1. OPERATIONAL TEST. During operation observe for any
unusual noise or vibration.
NOTE 2. ADJUSTMENTS. Make alI necessary adjustments during
operational test.
AaoslosA
