Chapter 1. INTRODUCTION - TM-5-4310-247-150026
Figure 1. Left-front view.
Figure 2. Right-rear view, with shipping dimensions.
Engine Torque Data in Foot-Pounds.
Figure 3. Practical wiring diagram.
Figure 4. Overall and lifting dimensions.
Chapter 2. INSTALLATION AND OPERATION INSTRUCTIONS - TM-5-4310-247-150032
Installation or Setting up Instructions - TM-5-4310-247-150033
Section II. MOVEMENT TO A NEW WORKSITE - TM-5-4310-247-150034
Stopping - TM-5-4310-247-150035
Operation Under Rainy or Humid Conditions - TM-5-4310-247-150036
Chapter 3. OPERATOR AND ORGANIZATIONAL MAINTENANCE INSTRUCTIONS - TM-5-4310-247-150037
Figure 6. Lubrication order.
Figure 6. Lubrication order. (cont) - TM-5-4310-247-150039
Figure 6. Lubrication order. (cont) - TM-5-4310-247-150040
Figure 6. Lubrication order. (cont) - TM-5-4310-247-150041
Section III. PREVENTIVE MAINTENANCE SERVICES - TM-5-4310-247-150042
Figure 7. Daily preventive maintenance services.
Figure 7. Daily preventive maintenance services. (cont)
Figure 8. Quarterly preventive maintenance services.
Figure 8. Quarterly preventive maintenance services. (cont) - TM-5-4310-247-150046
Figure 8. Quarterly preventive maintenance services. (cont) - TM-5-4310-247-150047
Section IV. OPERATOR MAINTENANCE - TM-5-4310-247-150048
Figure 9. Compressor oil filter installation.
Figure 10. Engine oil filter.
Figure 13. Ether primer service.
Figure 15. Storage battery service and removal.
Section V. TROUBLESHOOTING - TM-5-4310-247-150053
Section VI. RADIO INTERFERENCE SUPPRESSION - TM-5-4310-247-150054
Section VII. BODY
Figure 17. Body group
Section VIII. ELECTRICAL SYSTEM
Figure 18. Generator, starter and cylinder head cover removal.
Starter - TM-5-4310-247-150059
Figure 19. Lights and mounting parts
Generator Regulator
Storage Battery Testing
Figure 22. Chassis group.
Figure 23. Fuel pump timing marks.
Section IX. FUEL SYSTEM - TM-5-4310-247-150065
Section X. COOLING AND EXHAUST
Section XI. COMPRESSOR
Air Control Assembly
Figure 27. Compressor unit.
Hose Reels and Fittings
Figure 30. Hose reel assembly.
Section XII. VALVE ADJUSTMENT
Figure 30.2. Engine oil cooler and oil filter removal and installation.
Chapter 4. DEMOLITION, SHIPMENT, AND LIMITED STORAGE
Section II. SHIPMENT AND LIMITED STORAGE
Loading Equipment for Shipment
Inspection and Maintenance of Equipment in Storage - TM-5-4310-247-150077
Chapter 5. DIRECT AND GENERAL SUPPORT AND DEPOT MAINTENANCE INSTRUCTIONS
Table 2. Engine Repair and Replacement--Standards
Table 2. Engine Repair and Replacement--Standards-Continued
Table 3. Compressor Wear Limits
Chapter 6. GENERAL MAINTENANCE INSTRUCTIONS
Section III. REMOVAL AND INSTALLATION OF MAJOR COMPONENTS
Engine - TM-5-4310-247-150084
Chapter 7. REPAIR INSTRUCTIONS
Figure 32. Generator repair.
Figure 33. Starter repair.
Section II. FUEL SYSTEM
Fuel Tank Repair
Figure 34. Fuel pump, disassembled view
Figure 34. Fuel pump, disassembled view (cont)
Section III. COOLING SYSTEM
Section IV. COMPRESSOR LUBRICATION SYSTEM
Figure 36. Air receiver--oil separator.
Section V. COMPRESSOR
Figure 37. Air control assembly
Stator, Rotor, and Bearings
Figure 39. External engine parts, fuel injection side.
Section VI. ENGINE
Cleaning and Inspection. - TM-5-4310-247-150100
Figure 41. Balancer and oil pump.
Figure 42. Gear clearance.
Figure 43. Bushing alignment.
Figure 48. Shaft location dimensions.
Figure 50. Engine parts, manifold side.
Engine Parts
Cleaning, Inspection, and Repair. - TM-5-4310-247-150107
Figure 55. Cylinder head inspection.
Figure 57. Internal engine parts
Internal Engine Parts
Cleaning, Inspection, and Repair. - TM-5-4310-247-150111
Reassembly and Installation - TM-5-4310-247-150112
Figure 66. Camshaft parts
Camshaft Parts
Reassembly and Installation - TM-5-4310-247-150115
Section VII. FRAME PARTS
Figure 71. Control parts group - TM-5-4310-247-150117
Figure 72. Tool and battery boxes
Appendix I. REFERENCES - TM-5-4310-247-150119
REFERENCES (cont) - TM-5-4310-247-150120
Appendix II. MAINTENANCE ALLOCATION CHART - TM-5-4310-247-150121
Explanation of Columns - TM-5-4310-247-150122
Section II. Maintenance Allocation Chart - TM-5-4310-247-150123
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150124
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150125
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150126
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150127
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150128
Appendix III. BASIC ISSUE ITEMS LIST AND MAINTENANCE AND OPERATING SUPPLIES - TM-5-4310-247-150129
Section II. BASIC ISSUE ITEMS LIST - TM-5-4310-247-150130
Section II. BASIC ISSUE ITEMS LIST (cont)
Section III. MAINTENANCE AND OPERATING SUPPLIES - TM-5-4310-247-150132
TM-5-4310-247-15 Compressor Rotary Diesel Engine Driven Air Trailer Mounted 250 CFM 100 PSI (JOY Model RPV 250 DC20MSI) FSN 4310-952-7142 Manual
Figure 1. Left-front view.
Figure 2. Right-rear view, with shipping dimensions.
Engine Torque Data in Foot-Pounds.
Figure 3. Practical wiring diagram.
Figure 4. Overall and lifting dimensions.
Chapter 2. INSTALLATION AND OPERATION INSTRUCTIONS - TM-5-4310-247-150032
Installation or Setting up Instructions - TM-5-4310-247-150033
Section II. MOVEMENT TO A NEW WORKSITE - TM-5-4310-247-150034
Stopping - TM-5-4310-247-150035
Operation Under Rainy or Humid Conditions - TM-5-4310-247-150036
Chapter 3. OPERATOR AND ORGANIZATIONAL MAINTENANCE INSTRUCTIONS - TM-5-4310-247-150037
Figure 6. Lubrication order.
Figure 6. Lubrication order. (cont) - TM-5-4310-247-150039
Figure 6. Lubrication order. (cont) - TM-5-4310-247-150040
Figure 6. Lubrication order. (cont) - TM-5-4310-247-150041
Section III. PREVENTIVE MAINTENANCE SERVICES - TM-5-4310-247-150042
Figure 7. Daily preventive maintenance services.
Figure 7. Daily preventive maintenance services. (cont)
Figure 8. Quarterly preventive maintenance services.
Figure 8. Quarterly preventive maintenance services. (cont) - TM-5-4310-247-150046
Figure 8. Quarterly preventive maintenance services. (cont) - TM-5-4310-247-150047
Section IV. OPERATOR MAINTENANCE - TM-5-4310-247-150048
Figure 9. Compressor oil filter installation.
Figure 10. Engine oil filter.
Figure 13. Ether primer service.
Figure 15. Storage battery service and removal.
Section V. TROUBLESHOOTING - TM-5-4310-247-150053
Section VI. RADIO INTERFERENCE SUPPRESSION - TM-5-4310-247-150054
Section VII. BODY
Figure 17. Body group
Section VIII. ELECTRICAL SYSTEM
Figure 18. Generator, starter and cylinder head cover removal.
Starter - TM-5-4310-247-150059
Figure 19. Lights and mounting parts
Generator Regulator
Storage Battery Testing
Figure 22. Chassis group.
Figure 23. Fuel pump timing marks.
Section IX. FUEL SYSTEM - TM-5-4310-247-150065
Section X. COOLING AND EXHAUST
Section XI. COMPRESSOR
Air Control Assembly
Figure 27. Compressor unit.
Hose Reels and Fittings
Figure 30. Hose reel assembly.
Section XII. VALVE ADJUSTMENT
Figure 30.2. Engine oil cooler and oil filter removal and installation.
Chapter 4. DEMOLITION, SHIPMENT, AND LIMITED STORAGE
Section II. SHIPMENT AND LIMITED STORAGE
Loading Equipment for Shipment
Inspection and Maintenance of Equipment in Storage - TM-5-4310-247-150077
Chapter 5. DIRECT AND GENERAL SUPPORT AND DEPOT MAINTENANCE INSTRUCTIONS
Table 2. Engine Repair and Replacement--Standards
Table 2. Engine Repair and Replacement--Standards-Continued
Table 3. Compressor Wear Limits
Chapter 6. GENERAL MAINTENANCE INSTRUCTIONS
Section III. REMOVAL AND INSTALLATION OF MAJOR COMPONENTS
Engine - TM-5-4310-247-150084
Chapter 7. REPAIR INSTRUCTIONS
Figure 32. Generator repair.
Figure 33. Starter repair.
Section II. FUEL SYSTEM
Fuel Tank Repair
Figure 34. Fuel pump, disassembled view
Figure 34. Fuel pump, disassembled view (cont)
Section III. COOLING SYSTEM
Section IV. COMPRESSOR LUBRICATION SYSTEM
Figure 36. Air receiver--oil separator.
Section V. COMPRESSOR
Figure 37. Air control assembly
Stator, Rotor, and Bearings
Figure 39. External engine parts, fuel injection side.
Section VI. ENGINE
Cleaning and Inspection. - TM-5-4310-247-150100
Figure 41. Balancer and oil pump.
Figure 42. Gear clearance.
Figure 43. Bushing alignment.
Figure 48. Shaft location dimensions.
Figure 50. Engine parts, manifold side.
Engine Parts
Cleaning, Inspection, and Repair. - TM-5-4310-247-150107
Figure 55. Cylinder head inspection.
Figure 57. Internal engine parts
Internal Engine Parts
Cleaning, Inspection, and Repair. - TM-5-4310-247-150111
Reassembly and Installation - TM-5-4310-247-150112
Figure 66. Camshaft parts
Camshaft Parts
Reassembly and Installation - TM-5-4310-247-150115
Section VII. FRAME PARTS
Figure 71. Control parts group - TM-5-4310-247-150117
Figure 72. Tool and battery boxes
Appendix I. REFERENCES - TM-5-4310-247-150119
REFERENCES (cont) - TM-5-4310-247-150120
Appendix II. MAINTENANCE ALLOCATION CHART - TM-5-4310-247-150121
Explanation of Columns - TM-5-4310-247-150122
Section II. Maintenance Allocation Chart - TM-5-4310-247-150123
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150124
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150125
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150126
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150127
Section II. Maintenance Allocation Chart (cont) - TM-5-4310-247-150128
Appendix III. BASIC ISSUE ITEMS LIST AND MAINTENANCE AND OPERATING SUPPLIES - TM-5-4310-247-150129
Section II. BASIC ISSUE ITEMS LIST - TM-5-4310-247-150130
Section II. BASIC ISSUE ITEMS LIST (cont)
Section III. MAINTENANCE AND OPERATING SUPPLIES - TM-5-4310-247-150132
TM-5-4310-247-15 Compressor Rotary Diesel Engine Driven Air Trailer Mounted 250 CFM 100 PSI (JOY Model RPV 250 DC20MSI) FSN 4310-952-7142 Manual
