TM 5-4310-335-14
WARNING
Dry cleaning solvent, P-D-680 or P-S-661 used to clean parts is potentially
dangerous to personnel and property. Avoid repeated and prolonged skin
contact. Do not use near open flame or excessive heat. Flash point of
solvent is 100 - 138 . (38 . - 59 .)
F
F
C
C
b. Cleaning, Inspection and Repair.
(1) Clean all metal parts of the brake assembly with cleaning solvent, Federal Specification P-D-680,
and dry thoroughly using compressed air.
(2) Inspect the brakes for wear and defects.
(3) Replace brakes if defective.
Figure 4-4. Brake assembly.
4-14