B. TABLE OF SPECIFICATIONS
1. General
6. Dehydrator Assembly
Manufacturer ...........Champion Pneumatic Machines
Manufacturer .......... Wilkerson Corporation
Model ......................HR2-3M-1
Model ...................... 4001-2
Output .....................5 cfm at 175 psi
Maximum pressure . 200 psi
Desiccant ................ 85-059 (Silica Jel)
2. Electric Motor
Manufacturer ...........Marathon
7. Dehydrator Assembly
Model ......................9H 182TCFR7043AA W
Manufacturer .......... Wilkerson Corporation
Type ........................CFR-LE
Model ...................... 4001-2U
Cycle .......................60
Maximum pressure . 200 psi
Phase ......................Single
Desiccant ................ 85-060 (Molecular sieve)
Horsepower.............2
Volts ........................115/230
8. Filter
Duty.........................Continuous
Manufacturer .......... Wilkerson Corporation
Rated speed............1740
Model ...................... 1138-4MX
Frame......................182T
Temperature rise ....70 degrees
9. Capacities
Amperes:
Compressor crankcase 1 qt. (quart)
At 115 volts .............21.1
Air receiver tank ............ 4.0 cu. ft.
At 230 volts .............10.6
10. Air Receiver
3. Compressor
Manufacturer .......... Kargard
Manufacturer ......... Champion Pneumatic Machinery
Working pressure ... 200 psi
Model .................... R-1OB
Type ...................... 2-stage vertical
11. Air Hose
Size......................... 5/16 in. x 50 ft.
4. Compressor Air Cleaner
Manufacturer ......... Champion Pneumatic Machinery
12. Dimensions and Weight
Type ...................... Dry
Shipping weight ...... 528.5 lbs.
Shipping cube ......... 42.5 ft.
5. Magnetic Starter Switch Assembly
Length..................... 55 in.
Manufacturer ........... Furnas Electric
Height ..................... 41.in.
Style ........................ 82DA1ABHA1A X26
Width ...................... 28in.
Maximum pressure . 250 psi
Net Weight .............. 435 b.
Minimum differential .30 psi
MAINTENANCE FORMS AND RECORDS
E. DESTRUCTION OF ARMY MATERIAL TO
PREVENT ENEMY USE.
Maintenance forms and records that you are
required to use are explained in TM 38-750.
Refer to TM 750-244-3 for destruction of the
compressor.
D. REPORTING OF ERRORS
You can improve this manual by calling attention to
errors and by recommending improvements, using
DA Form 2028 (Recommended Changes to
Publications), or by a letter, and mall directly to
Commanding General, U.S.
Army Mobility
Equipment Command, ATTN: AMSME-MPP, 4300
Goodfellow Boulevard, St. Louis, Missouri 63120 A
reply will be furnished directly to you
2
