TM 5-4310-350-14
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
e. To adjust the belts, move the motor away from the compressor until there is tension on the
V-belts. Depress one of the V-belts midway between the pulley and flywheel; when the top Iines up
with the bottom of the belt next to it u rider normal thumb pressure the tension is correct.
CAUTION
Do not adjust the V-belts too tightly as this will overload motor
and compressor bearings. Also check and be sure pulley alin-
ment is maintained.
f. Tighten motor mounting bolts securely.
Remove fill plug in crankcase and fill to level in accordance with LO 54310-350-12.
Step 4. Check for faulty intake and exhaust valves.
5-10.1/(5-10.2blank)
Change 2
