TM 5-4310-352-14
Figure 4-1. Air compressor. removal and installation.
(4) Lift the air compressor (1) off the air re-
screws to the torque value given in Table 1-1. Connect
ceiver.
aftercooler to check valve in air receiver (fig. 1-2).
b.
Installation.
(4) Install V-belts (para 4-8).
(5) Install belt guard (para 3-7).
(1) Check that the air compressor is com-
pletely assembled and that fan wheel is properly installed.
(2) Position compressor on the air receiver.
4-11. Pilot Valve
(3) Install lockwashers (3) and capscrews (2) in
a. Removal.
base of compressor. Tighten the four mounting cap
(1) Disconnect tube (fig. 4-2).
4-4
