TM 5-4310-362-14
CYLINDER HEAD AND VALVES MODEL 20-911 (Cont)
LOCATION/ITEM
ACTION
REMARKS
8-13D ASSEMBLY
LOW PRESSURE
CYLINDERS
1.
Reed valve (1)
Place into position over valve plate
(2) and attach with screw (3).
2.
Low pressure head
Assemble components.
LOW PRESSURE CYLINDER
a. Place gasket (5) into position
over valve plate (2).
b. Place valve head (6) into posi-
tion over gasket (5).
c. Install silencer (7) in valve
head (6).
d. Install filter (8) in valve head
(6).
e. Place retainer (9) in position
and install screws (10) through
entire assembly.
3.
Gasket (11)
Place into position on cylinder.
4.
Low pressure head
Install on cylinder and thread
assembly (4)
screws (10).
5.
Capscrews (10)
Tighten evenly.
Change 1 8-16.3
