TM 5-4310-367-14
GENERAL continued
REMARKS
ACTION
LOCATION/lTEM
5-8. ASSEMBLY continued.
Install on crankshaft (60) if
4. 2 bearings (59)
removed after inspection.
Install in crankcase (63).
5. Oil seal (61)
Slide into crankcase (63).
6. Crankshaft (60)
Select shims (36) and (37) so the crankshaft turns freely
Install with 4 screws (32).
7. Gaskets (34, 36 and 37),
with end play of 0.007 inches. Shim (36) is 0.005 in. and
crankcase cover (35),
shim (37) is 0.010 in. thick.
breaker element (33) and
breaker chamber (31)
5-10
