TM 5-4310-368 -14
Figure 1-7. Gages and Clutch
INSTRUMENTS AND CONTROLS
INSTRUMENT AND CONTROL PANEL - is located on the back side of the unit. It is accessible by an access door
which also holds the service hose.
HOURMETER - is an electric clock which runs when the engine runs. It reads in hours to the nearest tenth,
maximum 9999.9.
AMMETER - indicates whether the battery is being charged or discharged.
FUEL GAGE - is controlled by a liquid level sensor unit in the fuel tank.
COMPRESSOR OIL PRESSURE GAGE - indicates pressure of lube oil in the compressor housing.
SERVICE PRESSURE GAGE - indicates pressure of air in the service hose when connected.
RECEIVER PRESSURE GAGE - indicates pressure in air receiver.
INTERSTAGE PRESSURE GAGES - indicate output pressure of each of the four compressor stages.
CLUTCH LEVER - mechanically engages the clutch linkage.
1-14
