TM 5-4310-371-14
5-3. MANIFOLD AND TUBING ASSEMBLIES.
WARNING
Disconnect compressor unit from main power supply before servicing, replacing
or repairing parts of equipment, to avoid personal injury.
WARNING
Release air pressure from air receiver and compressor pump before inspection,
performing procedures or disassembly of equipment to avoid personal injury.
a. Disassembly
(1) Air Inlet Filters and Tubing
(a) Remove air inlet filters (figure 5-4, item 1) by turning slotted set screw (figure 5-4, item 2) counter
clockwise.
(b) Remove breather tube assembly (figure 5-5, item 1) by removing compression nuts
(figure 5-5, item 2). Remove breather tube (figure 5-5, item 3) from left low pressure intake manifold
(c) Remove release valve tube assembly (figure 5-5, item 6) by removing compression nuts
(figure 5-5, item 2). Remove release valve tube (figure 5-5, item 8) from right high pressure exhaust
manifold (figure 5-5, item 9) and compression body (figure 5-5, item 10).
(d) Remove intercooler tube #1 (figure 5-4, item 3) from left low pressure exhaust manifold
compression nuts (figure 5-4, item 8) counter clockwise. Also, remove ferrules (figure 5-4, item 9) at
this time.
(e) Remove intercooler tube #2 (figure 5-4, item 4) from left high pressure intake manifold
(figure 5-4, item 16) and right low pressure exhaust manifold (figure 5-5, item 14). Turn compression
nuts (figure 5-4, item 8) counter clockwise. Also remove ferrules (figure 5-4, item 9) at this time.
(f) Remove right aftercooler tube (figure 5-4, item 5) from right high pressure exhaust manifold
(g) Remove left aftercooler tub e (figure 5-4, item 6) from left high pressure exhaust manifold (figure 5-4,
item 14). Turn compression nut (figure 5-4, item 8) counter clockwise and also remove ferrule
5-16
