TM 5-4310-371-14
(3) Air Inlet Filters and Tubing
(a) Install aftercooler tubes (figure 5 4, item 5 and 6) to aftercooler manifold (figure 5-4, item 7). Turn
compression nuts (figure 5-4, item 8) counter clockwise. Also replace ferrules (figure 5-4, item 9) if
necessary.
(b) Install left aftercooler tube (figure 5-4, item 6) to left high pressure exhaust manifold (figure 5-4, item
14). Turn compression nut (figure 5-4, item 8) clockwise. Also replace ferrules (figure 5-4, item 9) if
necessary.
(c) Install right aftercooler tube (figure 5-4, item 5) to right high pressure exhaust manifold (figure 5-4,
item 17). Turn compression nut (figure 5-4, item 8) clockwise. Also, replace ferrules (figure 5-4, item
9) if necessary.
(d) Install intercooler tube #2 (figure 5-4, item 4) to left high pressure intake manifold (figure 5-4, item 16)
and right low pressure exhaust manifold (figure 5-5, item 14). Turn compression nuts (figure 5-4, item
8) clockwise. Also replace ferrules (figure 5-4, item 9) if necessary.
(e) Install intercooler tube #1 (figure 5-4, item 3) to left low pressure exhaust manifold (figure 5-4, item
15) and to right high pressure intake manifold (figure 5-5, item 13). Turn compression nuts
(f) Install release valve tube (figure 5-5, item 8) to right high pressure exhaust manifold
(g) Install breather tube (figure 5-5, item 3) to left low pressure intake manifold (figure 5-5, item 4) and
straight compression body (figure 5-5, item 5). Install compression nuts (figure 5-5, item 2).
(h) Install air inlet filters (figure 5-4, item 1). Turn slotted set screws (figure 5-4, item 2) counter
clockwise. One air inlet filter must be placed in left low pressure intake manifold (figure 5-4, item 13).
The other in the right low pressure intake manifold (figure 5-4, item 18).
5-4. VALVE ASSEMBLIES.
WARNING
Disconnect compressor unit from main power supply before servicing, replacing
or repairing parts of equipment, to avoid personal injury.
5-21
