TM 5-4310-372-14
ENGINE AND SUPPORT ACCESSORIES - continued
4-34. REMOVAL.
NO.
ITEM(S)
ACTION
ITEM I.D.
WARNING
Never touch engine or engine accessories with bare hands during operation, or
before they have cooled sufficiently. Severe burns can be caused through care-
lessness.
1.
Governor Control Arm
a.
b.
2.
Mufflers
a.
b.
c.
Unscrew 2 machine
1to3
screws, with washers
and nuts.
Remove Control Arm.
4
Unscrew 2 capscrews
securing each muffler.
Remove muffler.
7
Remove gasket.
WARNING
Make certain any lifting device used has a capacity at least equal to the weight
being lifted. Failure to observe this precaution could result in injury or death to
personnel and damage to equipment.
3.
Gas Engine
a.
Unscrew 4 capscrews
and associated hardware.
b. Using proper lifting
methods remove engine
from the air receiver
platform.
4-35. CLEANING, INSPECTION AND REPAIR.
9 to12
13
NO.
ITEM(S)
ACTION
ITEM I.D.
1.
Governor Control Arm
a.
Inspect machine screw
1to3
and accompanying hard-
ware for thread damage,
elongation, etc.
b.
Inspect control arm for
trueness (flatness).
c.
Replace components as
necessary.
4-57