TM 5-4310-372-14
ENGINE AND SUPPORT ACCESSORIES - continued
4-35. CLEANING, INSPECTION AND REPAIR - continued
NO.
ITEM(S)
ACTION
ITEM I.D.
2.
Mufflers
WARNING
Drycleaning solvent P-D-580, used to clean parts, is potentially dangerous to
personnel and property. Avoid repeated and prolonged skin contact by wearing
rubber or solvent impermeable gloves when handling the solvent or material wet
with drycleaning solvent. Wash hands immediately after exposure with soap and
water and use a lanolin based skin cream to prevent skin drying. Do not use near
open frame or excessive heat. Flash point of solvent is 100°F (38°C). Ensure that
ventilation is adequate to reduce solvent vapor concentrations below acceptable
threshold limit values.
a.
3.
Gas Engine
b.
c.
4-36. ASSEMBLY.
Clean with soapy water
and/or solvent.
Refer to TM 9-2805-262-14
for engine associated
cleaning, inspection and
repair.
inspect capscrews, nuts
and associated washers
for thread damage,
elongation, cracks or
other damage.
7
13
9 to 12
NO.
ITEM(S)
ACTION
ITEM I.D.
WARNING
Make certain any lifting device used has a capacity at least squal to the weight
being lifted. Failure to observe this precaution could result in injury or death to
personnel and damage to equipment.
1.
Engine
a.
install atop air receiver
tank and align anchor
holes with slots provided
in deck.
13
4-58
Change 3
