TM 5-4310-372-14
AIR
5-6. DISASSEMBLY - conti
COMPRESSOR - continued
n u e d
3.
Intercooler Assembly
a .
b.
c.
d.
e .
4.
L OW Pressure Cylinder
a.
b.
c.
d.
e..
5.
Low Pressure Connecting a.
Rod, Piston and Rings
b .
c.
d.
e.
Unscrew intercooler
tubes from elbow fit-
tings on manifold.
Unscrew intercooler
manifolds from pipe
nipples attached to
c y l i n d e r s .
Remove elbow fittings
from manifolds.
Remove intercooler relief
valve from manifold.
Unscrew pipe nipples from
c y l i n d e r s .
42,43
44,45
46
47
48
D e t a c h c r a n k c a s e v e n t l i n e . 49
Unscrew vent line fitting
50
from cylinder.
Unscrew 4 capscrews and
51,52
washers securing cylinder
to crankcase.
Remove the cylinder by
lifting it away from the
piston, making sure that
piston and rings are not
damaged when they become
free of the cylinder.
Remove and discard the
gasket .
Slide connecting rod
from crankshaft and re-
move, along with the
attached piston from the
c r a n k c a s e .
53
the
54
55
Remove two top piston rings 56
(compression) from piston.
Use a piston ring expander
to prevent damage to rings.
Remove the two oil wiper
57
rings from the piston.
Remove lock rings from
58
piston pin ends.
Press out piston pin
59
from piston.
5-5
