TM 5-4310-377-13
Section IX. MAINTENANCE OF ELECTRIC MOTOR
3-22.. ELECTRIC MOTOR.
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Test
e. Replace
f. Installation
SET-UP:
Tools:
Common screwdriver
Pliers, water pump
1/4 inch wrench
1/2 inch wrench
Materials:
Brush, Medium Bristle (Appendix E, item 4)
Cloth, Lint-Free (Appendix E, item 3)
Solvent, Dry Cleaning (Appendix E, item 2)
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use
solvent only in a well-ventilated area. Avoid prolonged breathing of fumes. Keep
solvent away from flames. Do not use in excessive amounts. Avoid skin contact.
Personnel:
1 Person
Equipment Conditions:
Electrical power removed at master control panel.
Tank drain cock open and air bleed off (para. 2-2).
Guard assembly removed (para. 3-13a).
Drive belts removed (para. 3-14a).
Drive pulley removed (para. 3-15a).
GO TO NEXT PAGE
3-58
