TM 5-4310-377-13
4-3. ELECTRIC MOTOR - Continued.
Figure 4-5. Electric Motor, Assembly.
(1) Install switch (2) and stationary switch (3) on rotor (1).
(2) Install bearing (4), spacer (5), and endshield (6).
(3) Install fan (7), bearing (8), spring (9), and endshield (10).
(4) Install bolt (11), nut (12), fan (13), and lockring (14).
(5) Install cover (15) and secure with three screws (16).
(6) Install capacitor (17), gasket (18), cover (19), and two screws (20).
(7) Install other capacitor in same manner.
(8) Install gasket (21), box (22), and screw (23).
(9) Install gasket (24), cover (25), and screw (26).
END OF TASK
4-15/4-16 Blank