TM 5-4310-379-14
3-25. Fuel Filter Assembly (Cont).
c.
Repair. (figure 3-25)
(1)
Remove bolt (1) and gasket (2) and remove shell (3) and gasket (4).
(2)
Pour excess fuel from shell (3).
(3)
Remove filter (5), retainer (6), seat (7), seal (8), seat (9), and spring (10).
(4)
Remove drain cock (11).
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive
heat. Flash point of solvent is 100-138°F (38-600C).
(5)
Clean all Items with dry cleaning solvent and dry thoroughly.
(6)
Inspect all Items Including filter head (12) and replace all items that are bent, cracked or otherwise
damaged.
(7)
Install drain cock (11).
(8)
Install spring (10), seat (9), seal (8), seat (7), retainer (6), and filter (5) in shell (3).
(9)
Install shell (3) and gasket (4) and secure with bolt (1) and gasket (2). Tighten bolt (1) just enough to
prevent fuel leakage.
3-70
