TM 5-4310-379-14
3-26. Fuel Strainer Assembly (Cont).
c.
Repair. (figure 3-28)
(1)
Remove fuel strainer assembly, see para. b. above.
(2)
Remove strainer (1), retainer (2), seat (3), seal (4), seat (5), and spring (6).
(3)
Remove pet cock (7).
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive
heat. Flash point of solvent is 100-138°F (38-60°C).
(4)
Clean all items with dry cleaning solvent, and dry thoroughly.
(5)
Inspect shell (8) and strainer head (9) and replace if cracked or otherwise damaged.
(6)
Inspect strainer (1) and replace if torn or excessively dirty.
(7)
Inspect retainer (2), seat (3), seat (5) and spring (6) and replace if bent, cracked, or otherwise damaged.
(8)
Inspect pet cock (7) and bolt (10), and replace if threads are stripped or otherwise damaged.
(9)
Inspect gasket (11), seal (4), and gasket (12) and replace if cracked or otherwise damaged.
(10)
Install spring (6), seat (5), seal (4), seat (3), retainer (2), and strainer (1).
(11)
Install pet cock (7).
(12)
Install fuel strainer assembly, see para. b above.
3-76 Change 1
