TM 5-4310-379-14
3-28. Air Cleaner Assembly
This task covers:
a.
Service
b.
Replace
c.
Repair
INITIAL SETUP:
Tools
Materials/Parts (Cont)
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Element, Air Cleaner Assembly
Solvent, Drycleaning (Item 23, Appendix D)
Materials/Parts
Rags, Wiping (Item 21, Appendix D)
Lubricating Oil Ground Equipment (Item 18,
Air Cleaner Assembly
Appendix D)
Gasket, Air Cleaner Assembly
a.
Service. (figure 3-31)
(1)
Remove wingnut screw (1), seal (2) and retainer (3) and remove air cleaner cover (4), body (5) and gasket
(6).
(2)
Remove air cleaner element (7) from body (5).
(3)
Pour oil from air cleaner body into suitable container.
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive
heat. Flash point of solvent is 100-138°F (38-60°C).
(4)
Clean element (7), body (5) and cover (4) with dry cleaning solvent and thoroughly.
(5)
Fill body (5) with oil to LEVEL line.
(6)
Install element (7) in body (5).
(7)
Install gasket (6), body (5) and cover (4) and secure with wing nut screw (1), seal (2), and retainer (3).
3-82
