TM 5-4310-379-14
3-31. Starter (Cont).
b.
Replace. (figure 3-37)
(1)
Remove nut (1) and lockwasher (2) and tag and remove negative cable (3) and black wire (4).
(2)
Remove nut (5) and tag and remove positive cable (6) and blue wire (7).
(3)
Remove nut (8) and tag and remove blue wire (9).
(4)
Remove three screws (10), spacers (11), and lockwashers (12) and remove starter (13).
(5)
Install starter (13) and secure with three screws (10), spacers (11) and lockwashers (12). Torque screws to
137-147 Ib-ft (186-200 Nm).
(6)
Install blue wire (9) and secure with nut (8).
(7)
Install positive cable (6) and blue wire (7) as tagged, and secure with hut (5).
(8)
Install negative cable (3) and blue wire (4) as tagged and secure with lockwasher (2) and nut (1).
3-94