TM 5-4310-379-14
3-32. Starting Aid (Cont).
b.
Repair. (figure 3-39)
(1) Remove starting aid, see para. a. above.
(2) Loosen clamp (1) and remove clamp (1) and bracket (2).
(3) Unscrew tank (3) from valve (4).
(4) Remove two screws (5) and nuts (6) and remove bracket (7) from valve (4).
(5) Inspect tank (3) and replace if empty.
(6) Inspect clamp (1), bracket (2) and bracket (7) and replace if bent, cracked, or otherwise damaged.
(7) Inspect valve (4) and replace if cracked or otherwise damaged.
(8) Inspect gasket (8) and replace if cracked or otherwise damaged.
(9) Inspect line (9) and replace if cracked, or fittings are stripped or otherwise damaged.
(10) Install valve (4) on tank (3).
(11) Install bracket (7) and secure with two screws (5) and nuts (6).
(12) Install bracket (2) and tighten clamp (1).
FOLLOW-ON MAINTENANCE
Install starting aid (para. a.)
3-98