TM 5-4310-379-14
4-9. Injector Control (Cont).
b.
Replace. (figure 4-4)
(1)
Remove cotter pin (1) and remove pin (2).
(2)
Remove four screws (3) and remove injector control (4).
(3)
Install injector control (4), ensure arms (5) align with injector arms (6) and secure with four screws (3).
Torque screws to 10-12 Ib-ft (14-16 Nm).
(4)
Install pin (2) and secure with cotter pin (1).
(5)
Adjust control rack as per para. a. above.
Change 1
4-12
