TM 5-4310-379-14
(16)
Using flywheel housing assembly concentricity checking tool, check flywheel housing concentricity. The
maximum total indicator reading must not exceed .013 in. (.033 cm). If readings are out of tolerance, remove
flywheel housing assembly (7) and check for dirt or old gasket material between flywheel housing assembly and
cylinder block (10). Reinstall flywheel housing assembly and recheck concentricity. Replace flywheel housing
assembly (7) if still out of tolerance.
Figure 4-20. Flywheel Housing, Replace.
FOLLOW-ON MAINTENANCE
(1) Install flywheel assembly (para. 4-19).
(2) Install oil pan (para. 4-14).
(3) Install starter (para. 3-31).
(4) Install rear engine mount (para. 3-46).
4-49