TM 5-4310-379-14
4-19. Flywheel Assembly (Cont).
c.
Installation. (figure 4-19)
(1)
Install new flywheel assembly (9) on flywheel lifting tool.
(2)
Check crankshaft dowel pins (11). The dowel pins must not extend more than 1/2 in. (1.27 cm).
NOTE
One bolt hole is offset so the flywheel can only be installed one way.
(3)
Install flywheel assembly (9) and remove flywheel lifting tool.
(4)
Apply antiseize compound to flywheel bolt threads and under head and remove excess.
NOTE
It may be necessary to prevent crankshaft from turning in order to properly torque the bolts.
(5)
Install scuff plate (8) and bolts (7) and torque bolts to 50 Ib-ft (68 Nm).
(6)
Turn each bolt an additional 90-1200 to obtain proper clamping.
(7)
Install drive ring (6) and secure with eight screws (4) and lockwashers (5).
(8)
Install power take-off (1) and secure with 12 screws (2) and lockwashers (3).
FOLLOW-ON MAINTENANCE
Install drive belts (para. 3-12).
4-46
