TM 5-4310-379-14
4-24.
Air Compressor Assembly (Cont).
c.
Installation. (figure 4-32)
WARNING
Before lifting compressor ensure that lifting device and slings have the needed capacity to support weight
of compressor. Do not sling compressor by the manifold. Failure to follow these instructions may result in
serious injury or death to personnel.
CAUTION
As compressor is lowered into frame, ensure that compressor does not come into contact with the frame.
Failure to do so could result in damage to compressor.
(1)
Attach lifting device to compressor (1) and install compressor on frame (2).
(2)
Loosely install four bolts (3), washers (4), and nuts (5) securing compressor to frame (2).
(3)
Install flex pipe (6) with flange (7) and gasket (8) on discharge manifold (9) and secure with four screws (10).
(4)
Install flex pipe (6) on receiver tank fitting (11) and tighten coupling nut (12).
(5)
Install oil pressure line (13) on oil pump fitting (14) and tighten coupling nut (15).
(6)
Install air pressure line (16) on VD pilot tee (17) and tighten coupling nut (18).
(7)
Install belts (19) on compressor (1) and slide compressor away from engine by tightening adjusting screw (20).
(8)
Tighten four bolts (3) and (21).
4-78
