TM 5-4310-379-14
(6)
Loosen four bolts (17) and (18) and adjusting screw (19) and slide compressor (20) towards engine.
(7)
Remove four belts (21) from compressor (20).
(8)
Loosen coupling nut (22) securing air pressure line (23) to VD pilot tee (24).
(9)
Loosen coupling nut (25) securing oil pressure line (26) to oil pump fitting (27).
(10)
Loosen coupling nut (28) securing flex pipe (29) to air receiver tank fitting (30).
(11)
Remove four screws (31) securing flange (32) to discharge manifold (33) and remove flange and gasket (34) with
flex pipe (29).
(12)
Remove four nuts (35), washers (36), and bolts (17) securing compressor (20) to frame (5).
WARNING
Before lifting compressor ensure that lifting device and slings have the needed capacity to support weight
of compressor. Do not sling compressor by the manifold. Failure to follow these instructions may result in
serious injury or death to personnel.
CAUTION
Before lifting compressor, ensure that all air lines, hoses and parts are clear of obstructions. Failure to do
so will result in damage to the compressor.
(13)
Attach lifting device to compressor and remove compressor.
(14)
Set compressor on suitable wood blocking to prevent flywheel pulley from hitting ground.
4-77
