TM 5-4310-379-14
4-28.
Compressor Dual Control Check Valve Assembly (Cont)
WARNING
Leave 1 1/2 threads exposed on fitting when applying teflon tape. This will ensure that no teflon tape will
hang down inside the air system. Teflon tape should be wrapped in such a manner that when the fitting is
tightened the tape will not loosen. Failure to wrap teflon tape correctly may result in contamination or
blockage of the air system and subsequent possible injury or death to the diver.
(3)
Apply teflon tape and install dual control check valve assembly (3) on VD pilot valve (4).
(4)
Apply teflon tape to install reducing bushing (1) and straight tube connector (2) and install in dual control check
valve assembly (3).
FOLLOW-ON MAINTENANCE
Install lines and fittings (para. 4-25).
4-97
