TM 5-4310-379-14
4-29.
Compressor Shroud.
This task covers:
a.
Replace
INITIAL SETUP:
Tools
Materials/Parts
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Shroud, Left Hand
Shroud, Right Hand
Shroud, Center
Replace. (figure 4-40)
(1)
Loosen fitting nut (1) and disconnect line (2).
(2)
Remove 12 screws (3) and remove cover (4).
(3)
Remove three screws (5) and nuts (6) and remove drive belt shroud (7).
(4)
Remove two screws (8), lockwashers (9), and washers (10) securing top shroud (11) to brackets (12).
(5)
Remove ten screws (13) securing top shroud (11) to left shroud (14) and right shroud (15) and remove top
shroud.
(6)
Remove two screws (16), washers (17), and nuts (18) securing left shroud (14) and right shroud (15) to cross
brace (19).
(7)
Remove two screws (20), lockwasher (21), and washers (22) securing left shroud (14) and right shroud (15) to
brackets (23) and remove left and right shrouds.
(8)
Install left shroud (14) and right shroud (15) and secure to brackets (23) with two screws (20) and lockwasher (21)
and washer (22).
(9)
Install two screws (16), washers (17), and nuts (18) securing left shroud (14) and right shroud (15) to cross brace
(19).
(10)
Install top shroud (11) and secure to left shroud (14) and right shroud (15) with ten screws (13).
(11)
Install two screws (8), lockwashers (9), and washers (10) securing top shroud (11) to brackets (12).
(12)
Install drive belt shroud (7) and secure with three screws (5) and nuts (6).
(13)
Install cover (4) and secure with 12 screws (3).
(14)
Install line (2) and tighten fitting nut (1).
4-98
