TM 5-4310-379-14
(18)
Install street elbow (16) in union elbow (17).
(19)
Install copper tube (15) on flare (19) and street elbow (16) and tighten two flare nuts (14).
(20)
Install five plastic clamps (8) and steel plates (7) and secure with ten bolts (6).
(21)
Install case (2) on case support (3) and install three bolts (4) and nuts (5).
(22)
Install three screws (1) securing case (2) to case support (3).
(23)
Install safety valve (13) on receiver tank (12).
(24)
Install valve (11) on elbow (10).
(25)
Install elbow (10) on hex nipple (9).
(26)
Install hex nipple (9) with elbow (10) and valve (11) attached in receiver tank (12).
Change 1
4-155